Jeremy Shen
ea3e3b8ac7
Step 2 UI now shows real-time flash operation phases parsed from program_flash output: - Erase: "Performing Erase Operation..." → sf erase → Erased: OK - Program: "Performing Program Operation..." → write blocks 0%→100% - Verify: "Performing Verify Operation..." → read+cmp 0%→100% Configuration additions: - erase_before_program checkbox: controls whether to pre-erase before programming - flash_model: chip type for capacity reference (s25fl256s1 = 32 MiB) subprocess_utils.py now emits 'phase' callbacks (erase/program/verify/done) detected from program_flash output transitions.
26 lines
880 B
YAML
26 lines
880 B
YAML
bootloader_bin_path: /home/ly0kos/work/Verify/FW/tftp_app/bootloader/bootloader_z100_800M.bin
|
|
bootloader_bit_path: /home/ly0kos/work/Verify/FW/tftp_app/bootloader/pl_arm_wrapper_hw_platform_0/pl_arm_wrapper.bit
|
|
bootloader_elf_path: /home/ly0kos/work/Verify/FW/tftp_app/bootloader/app.elf
|
|
firmware_bin_path: /home/ly0kos/work/Verify/FW/V1.3.1.3.3_06_01_pmu_cpld_check/V1.3.1.3.3_06_01_pmu_cpld_check.bin
|
|
flash_type: qspi-x4-single
|
|
flash_model: s25fl256s1
|
|
erase_before_program: true
|
|
fsbl_elf_path: /home/ly0kos/work/Verify/FPGA/Xilinx/Z100/fsbl_qspi_bypass.elf
|
|
inter_step_delay: 2
|
|
ping_count: 3
|
|
ping_timeout: 5
|
|
reboot_timeout: 30
|
|
serial_baudrate: 115200
|
|
serial_port: /dev/ttyUSB0
|
|
step_timeouts:
|
|
bitstream: 60
|
|
check_env: 30
|
|
elf_download: 60
|
|
flash_erase: 120
|
|
flash_program: 600
|
|
tftp_reboot: 120
|
|
tftp_upload_name: z7bin
|
|
uart_delay: 3
|
|
vitis_path: ''
|
|
zynq_ip: 192.168.100.11
|