Jeremy Shen
d5fd816ff9
Replace 'Read Serial' button with 'Open UART' that opens a new UART Monitor window (CTkToplevel) with: - Title bar with status indicator (● connecting/ready/monitoring/error) - Port info display + Start/Stop/Clear buttons - Large scrollable log area (CTkTextbox) with monospace font - Auto-scroll to bottom, line counter in status bar - Boot info parsing (IP, version) shown as [BOOT] prefix - Background serial monitoring via UartMonitor class UART unavailable handling: - On init, tries to open serial port in background thread - If port can't open → shows 'UART 不可用' state with error message - If port opens → shows 'Ready', user clicks Start to begin monitoring Window features: - Modal (grab_set) — focus stays on monitor window - Clean up UartMonitor on close (WM_DELETE_WINDOW handler) - Thread-safe UI updates via after(0, ...) - Reuses existing UartMonitor from serial_monitor.py
26 lines
880 B
YAML
26 lines
880 B
YAML
bootloader_bin_path: /home/ly0kos/work/Verify/FW/tftp_app/bootloader/bootloader_z100_800M.bin
|
|
bootloader_bit_path: /home/ly0kos/work/Verify/FW/tftp_app/bootloader/pl_arm_wrapper_hw_platform_0/pl_arm_wrapper.bit
|
|
bootloader_elf_path: /home/ly0kos/work/Verify/FW/tftp_app/bootloader/app.elf
|
|
erase_all: true
|
|
firmware_bin_path: /home/ly0kos/work/Verify/FW/V1.3.1.3.3_06_01_pmu_cpld_check/V1.3.1.3.3_06_01_pmu_cpld_check.bin
|
|
flash_model: s25fl256s1
|
|
flash_type: qspi-x4-single
|
|
fsbl_elf_path: /home/ly0kos/work/Verify/FPGA/Xilinx/Z100/fsbl_qspi_bypass.elf
|
|
inter_step_delay: 2
|
|
ping_count: 3
|
|
ping_timeout: 5
|
|
reboot_timeout: 30
|
|
serial_baudrate: 115200
|
|
serial_port: /dev/ttyUSB0
|
|
step_timeouts:
|
|
bitstream: 60
|
|
check_env: 30
|
|
elf_download: 60
|
|
flash_erase: 120
|
|
flash_program: 600
|
|
tftp_reboot: 120
|
|
tftp_upload_name: z7bin
|
|
uart_delay: 3
|
|
xilinx_path: /data/xilinx
|
|
zynq_ip: 192.168.100.11
|