Init Repo

CPLD1/RelayConTop_tf.v

@@ -0,0 +1,93 @@
+
+
+// TOOL:     vlog2tf
+// DATE:     Fri May 15 17:23:27 2026
+ 
+// TITLE:    Lattice Semiconductor Corporation
+// MODULE:   RelayConTop
+// DESIGN:   RelayConTop
+// FILENAME: RelayConTop_tf.v
+// PROJECT:  NewExtIns_CPLD1
+// VERSION:  2.0
+// This file is auto generated by Diamond
+
+
+`timescale 1 ns / 1 ps
+
+// Define Module for Test Fixture
+module RelayConTop_tf();
+
+// Inputs
+    reg i_sys_clk;
+    reg i_rst_n;
+    reg i_sclk;
+    reg i_mosi;
+    reg i_cs;
+    reg i_rready;
+    reg i_wvalid;
+
+
+// Outputs
+    wire o_miso;
+    wire o_rvalid;
+    wire o_wready;
+    wire o_err;
+    wire o_con_done;
+    wire [18:0] o_DMM_EN;
+    wire o_IO_RC1;
+    wire o_RC_T27;
+    wire o_RC_T28;
+    wire o_RC_T29;
+    wire o_RC_T30;
+    wire o_RC_T31;
+    wire [31:0] o_OC_1;
+    wire [31:0] o_OC_2;
+    wire [31:0] o_OC_3;
+    wire [31:0] o_OC_4;
+
+
+// Bidirs
+
+
+// Instantiate the UUT
+// Please check and add your parameters manually
+    RelayConTop UUT (
+        .i_sys_clk(i_sys_clk), 
+        .i_rst_n(i_rst_n), 
+        .i_sclk(i_sclk), 
+        .i_mosi(i_mosi), 
+        .i_cs(i_cs), 
+        .o_miso(o_miso), 
+        .o_rvalid(o_rvalid), 
+        .i_rready(i_rready), 
+        .i_wvalid(i_wvalid), 
+        .o_wready(o_wready), 
+        .o_err(o_err), 
+        .o_con_done(o_con_done), 
+        .o_DMM_EN(o_DMM_EN), 
+        .o_IO_RC1(o_IO_RC1), 
+        .o_RC_T27(o_RC_T27), 
+        .o_RC_T28(o_RC_T28), 
+        .o_RC_T29(o_RC_T29), 
+        .o_RC_T30(o_RC_T30), 
+        .o_RC_T31(o_RC_T31), 
+        .o_OC_1(o_OC_1), 
+        .o_OC_2(o_OC_2), 
+        .o_OC_3(o_OC_3), 
+        .o_OC_4(o_OC_4)
+        );
+
+
+// Initialize Inputs
+// You can add your stimulus here
+    initial begin
+            i_sys_clk = 0;
+            i_rst_n = 0;
+            i_sclk = 0;
+            i_mosi = 0;
+            i_cs = 0;
+            i_rready = 0;
+            i_wvalid = 0;
+    end
+
+endmodule // RelayConTop_tf